Functional parts
Made-to-measure spare parts
Broken a part that is no longer made? Need a one-off component to your own spec? We will make an exact spare by 3D printing — quickly, affordably, and in a material that lasts.
from 6,40 €
- Minimum order
- 1 piece
- Production time
- 2–5 working days
- Largest part
- 256 × 256 × 256 mm
- Tolerance
- ±0.2 mm
- Materials and colours
- custom.hub_fact_materials_value
- Drawing service
- 27,60 € / hour
At a glance
The production time above is for made-to-order work. Catalogue items and uploaded models are dispatched within 48 hours. Transit is counted separately — 1–3 days inside Czechia, 3–7 days across Europe.
Overview
3D printing spare parts is the right answer when you need one specific component and a production run makes no sense. We can reproduce a damaged part exactly, or design a completely new component to your requirements. The materials we use hold up mechanically and thermally in real service.
- Single pieces made, with no minimum order
- Exact replicas of discontinued or unobtainable parts
- Materials resistant to wear, heat and chemicals
- Fast turnaround — usually 3-5 working days
- The part can be improved on the original, not merely copied
01 What people ask for
The briefs that come in most often
-
Plastic clips and fasteners
Replacement fixings, clips, catches and brackets for appliances, cars and electronics.
from 6,40 €/pc
-
Gears and drive parts
Accurately printed gears and transmission components in tough PETG for mechanical use.
from 10,60 €/pc
-
Covers and caps
Replacement covers, caps and panels for household appliances, industrial equipment and electronics.
from 8,50 €/pc
-
Hinges and pivots
Working hinges, pivots and rotating parts printed in materials combining strength with flexibility.
from 8,50 €/pc
-
Adapters and reducers
Made-to-measure adapters, reducers and couplings for joining components that were never meant to fit.
from 7,60 €/pc
-
Parts for vintage and retro equipment
Replica parts for older devices and machines that are no longer manufactured commercially.
from 12,70 €/pc
02 What it costs
Spare part pricing
1-5 pcs
Simple part
6,40 € – 21,20 €
- Simple shapes (clips, caps, covers)
- Printed in PLA or PETG
- Standard accuracy ±0.2 mm
- Delivery within 5 working days
A range, not a quote
1-10 pcs
Technical part
12,70 € – 63,70 €
- More complex geometry and threads
- Material chosen for the mechanical demand
- Strength and infill optimised
- Technical consultation included
- Delivery within 3-5 working days
A range, not a quote
10-100 pcs
Batch of spare parts
4,30 € – 17,00 €/pc
- Volume discount from 10 pieces
- Consistent quality across the batch
- Priority production
- Full dimensional inspection
- Repeat runs available
A range, not a quote
The ranges above are indicative — the final price comes from the volume of the model, the material and the quantity. Upload a model and you get the exact number straight away.
Upload model03 How it goes
How to order a spare part
01
Send your requirements or a 3D model
Upload a 3D model of the part (STL, STEP), or send photographs, a drawing or the physical damaged part.
02
Technical consultation
We assess feasibility, recommend a suitable material and confirm dimensions. If you have no 3D model, we can create one.
03
Production
The part is printed with settings optimised for strength and accuracy, and monitored during printing.
04
Quality check and delivery
The finished part is checked for dimensions and quality, packed safely and delivered anywhere in the Czech Republic and Slovakia.
Customisation
Tailoring the spare part
- Material chosen for the load
- Material picked for the mechanical demand — standard PLA for light parts, tough PETG for mechanical loads and outdoor use. For extreme conditions we arrange special materials by agreement.
- Accurate dimensions
- Made from your 3D model, a technical drawing or a physical sample — to within ±0.2 mm.
- Functional improvements
- The design can be revised — weak points reinforced, ribbing added, or the geometry optimised for a longer life.
- Colour and appearance
- A choice of dozens of filament colours. The part can match the original visually or stand out in a contrasting colour.
Who it's for
Who orders custom spare parts
- Households
- Replacing cracked or worn plastic parts in appliances, furniture and household items.
- Repair shops
- Fast production of unobtainable spares, so a repair is not held up waiting for a delivery.
- Industrial operations
- Spare parts for production lines, jigs and machines — keeping downtime and cost down.
- Garages and classic cars
- Replica plastic parts for classic vehicles and automotive components that are no longer available.
- Collectors and restorers
- Missing parts made for the restoration of antique instruments, historic machinery and collectors' items.
Elsewhere in custom
- Made-to-measure office accessories We make office accessories sized precisely to your workspace. Desk organisers, monitor stands, cable grommets — all designed to make the working day tidier and easier.
- Custom prototypes Turn your idea into something you can hold within days. We print accurate prototypes in a wide choice of materials — from the first concept model to a fully functional part ready for testing.
- Custom packaging and protective inserts We make packaging, protective inserts and transport trays shaped exactly to your products. 3D printing gives a perfect fit and dependable protection in storage, in transit and on display.
- Exhibition and presentation models We make detailed exhibition models, architectural scale models and presentation exhibits that hold attention at trade fairs, in showrooms and in client meetings. High accuracy and a professional finish.
Questions
Frequently Asked Questions
Yes. Send photographs of the damaged part from several angles, a technical drawing, or the part itself. We measure it, model it and print it. 3D modelling is charged at €26/hour.
It depends on the material. PETG offers excellent toughness, dimensional stability and good chemical resistance, and copes with temperatures up to roughly 70 °C. For most household and industrial uses a printed part is a fully functional replacement. Where higher heat resistance is needed we arrange special materials by agreement.
Certainly. We often revise the design — reinforcing weak points, adding ribbing, or changing the shape to work better. The part does not have to be a copy; it can be better than the original.
There isn't one — we will make a single piece. That is the main advantage of 3D printing over conventional manufacturing, where a one-off is simply not available.
Our FDM printers work to ±0.2 mm. For parts with mating faces and threads we run calibration tests to make sure the fit is right.
The cost of 3D modelling (€26/hour) is added to the printing price. A simple part typically takes 1-2 hours to model. We confirm the exact price once we have assessed the complexity.
Request a quote
Request a Quote
Describe your project and we'll get back to you with a quote within 24 hours.
Fig. 06 — Start here
Need a spare part made to measure?
Send us a photograph, a drawing or a 3D model of the damaged part. We will confirm the price and delivery date within 24 hours.